Nortel Networks - EMC

Below are all the different types of Nortel Networks. Select the device of your choice, to download the manual

Contents

NgTRTEL 209823 A NETWORKS Installing the EMC Control Clamp The EMC Control Clamp must be placed no further than 3 7 cm 1 1 2 inches from the connector located on the PCMCIA card The cable must pass through the clamp three times to function properly To attach the EMC Control Clamp to the Ethernet cable follow these procedures 1 Open the clamp by placing your thumb nail into the side of the clamp that has the edge on it Pull out and lift the top of the clamp 2 Place the Ethernet cable through the center of the clamp Adjust the cable to make sure you are within 3 7 cm 1 1 2 inches of the PC card connector 3 Holding the cable in the clamp with your thumb wrap the Ethernet cable around and through the center of the clamp two more times ...